How To Start A Heat And Glo Fireplace

So, you've got a Heat & Glo fireplace, huh? Fancy! You know, I've always been a bit envious of those who can enjoy a cozy fire with just a flick of a switch. But hey, no time like the present to learn, right?

First Things First: Safety First!

Before we dive into the fun stuff, let's talk safety. I mean, we're dealing with fire here, folks. Make sure your fireplace is clean and clear of any debris. And while you're at it, check the glass doors - they should be closed when the fire's on to keep those pesky sparks in check.

Now, Let's Get This Show On The Road

Alright, so you've got your fireplace all cleaned up and ready to go. Now, let's see how to start that fire, shall we?

First things first, turn off the power to your fireplace at the circuit breaker. I know, I know, it's counterintuitive, but trust me on this one. We don't want any unexpected surprises, do we?

Next up, grab your trusty screwdriver. You'll need it to remove the control panel on the front of your fireplace. It's usually held in place by a few screws. Don't worry, it's not as scary as it sounds. Just take your time and you'll be fine.

Meet Your Fireplace's Brain

Underneath that control panel, you'll find the control module - the brains of the operation, if you will. It's usually held in place by a couple of screws. Once you've removed it, you should see a small button labeled 'Reset'.

Now, here's where things get a tad bit tricky. You've got to hold down that reset button for about 10-15 seconds. It might feel like an eternity, but trust me, it's worth it. This little maneuver resets the fireplace's ignition system, making it safe to start a new fire.

Time to Reassemble

Alright, now that you've reset the system, it's time to put everything back together. Just reverse the steps you took to get to the control module. Easy peasy, right?

How to Turn on Heat N Glo Fireplace | 7 Easy Steps (2026)

Once you've got everything back in place, it's time to turn the power back on at the circuit breaker. And voila! Your fireplace should be ready to go.

Let's Get That Fire Going

Now, here's the fun part. To start your fire, just turn the control knob to the 'On' position. You should see the igniter start to glow, and within a few seconds, you should have a nice, warm fire going.

But wait, there's more! You can adjust the flame height using the 'High' and 'Low' settings on your control panel. Fancy, huh?

Enjoy Your Fireplace, Responsibly

And there you have it! You're now the proud owner of a working Heat & Glo fireplace. Isn't that something? Just remember to always keep an eye on your fire, and never leave it unattended. Safety first, remember?

Oh, and one more thing. Don't forget to turn off your fireplace when you're done. I know it's tempting to leave it on all day, but trust me, your electricity bill will thank you later.

So, what are you waiting for? Go on, get that fire going, and enjoy your newfound fireplace prowess. You've earned it!