How To Reset Kenwood Touch Screen Radio

So, there I was, cruising down the highway, windows down, wind rustling through my hair, and suddenly, my Kenwood touch screen radio decided it was time for a little nap. No response, no music, just the hum of the engine and the sound of my own thoughts. Not exactly the road trip vibes I was going for. Sound familiar?

Don't worry, you're not alone. These touch screen radios can be a bit finicky sometimes, but don't you fret, I've got you covered. Today, we're going to tackle the beast and learn how to reset that Kenwood touch screen radio. Let's dive in, shall we?

Why Reset Your Kenwood Touch Screen Radio?

Before we get our hands dirty, let's talk about why you might want to reset your radio in the first place. It could be because of a software glitch, a wonky setting, or maybe it just needs a good old fashioned nap, like mine did. Resetting your radio can often fix these issues and get your tunes back on track.

Before You Start

First things first, let's make sure you've got everything you need. You'll need a small, flathead screwdriver, and about 10 minutes of your time. Also, make sure your radio is fully charged or connected to your car's power supply. We don't want any unexpected power outages halfway through the process.

Now, let's get down to business.

Kenwood Radio Reset Button Location at Lillian Hecker blog

How To Reset Your Kenwood Touch Screen Radio

Method 1: Soft Reset

This is the easiest and quickest method. It's like giving your radio a little power nap. Here's how:

1. Press and hold the Power button for about 10 seconds. This should turn off your radio.
2. Wait for about 30 seconds. This is the 'nap' part. Let your radio rest.
3. Press the Power button again to turn your radio back on. It should be good as new!

If your radio is still not cooperating, don't worry, we've got another trick up our sleeve.

How to restore settings on the Kenwood DDX793 touch screen radio - YouTube

Method 2: Hard Reset

This method is a bit more involved, but it can kick your radio back into gear if the soft reset didn't do the trick. Here's how:

1. First, you'll need to locate the reset hole on your radio. It's usually a small pinhole near the bottom or side of the unit. If you're having trouble finding it, check your radio's manual.
2. Using your small, flathead screwdriver, gently press and hold the reset button inside the hole for about 10 seconds. You should feel a slight 'click' when you've pressed it far enough.
3. After 10 seconds, release the button. Your radio should turn off and then back on again. If it doesn't, try pressing and holding the power button for another 10 seconds.

And there you have it! Your Kenwood touch screen radio should be back up and running, ready to pump out your favorite tunes. If you're still having trouble, it might be time to consider a visit to a professional. But hey, at least you gave it your best shot, right?

So, the next time your radio decides to take a siesta, you'll know exactly what to do. Happy resetting, and remember, keep your tunes loud and your spirits higher!