How To Get Water Out Of A Watch

So, you've gone for a swim and now your trusty timekeeper is ticking a little slower than usual? Or maybe you've just had a close encounter with the kitchen sink, and your watch is looking a bit soggy? Don't panic, we've all been there. Let's dive in and learn how to get water out of a watch, shall we?

First Things First: Stay Calm and Don't Shake!

You might be tempted to shake your watch like a polaroid picture, but hold your horses! Shaking can actually push water further into those tiny crevices, making your problem worse. So, let's keep our cool and tackle this like the pro we are.

Identify Your Watch's Water Resistance

Before we start, let's quickly understand what we're dealing with. Most watches have some level of water resistance, indicated by a number followed by 'm' (like 50m or 100m). This means they can withstand pressure at that depth. But remember, this doesn't make them waterproof – it's more like water-resistant.

Here's a fun fact: The 'm' stands for 'meters', not 'meters per second' as some people think. So, a 50m watch can handle depths up to 50 meters, not 50 meters per second!

Now, Let's Get That Water Out!

Option 1: The Rice Trick

This one's a classic. Fill a bowl with uncooked rice, place your watch face down on top, and let it soak for a day or two. The rice will absorb the moisture, helping to dry out your watch.

But be warned, this method isn't perfect. It might not reach all the nooks and crannies, and it can't fix any damage that's already been done. Plus, it's not great for the environment, so use it sparingly.

How to Get Water/Fog/Moisture Out of a Watch - Professional Guide

Option 2: The Vacuum Seal

This one's a bit more high-tech. You'll need a vacuum sealer and some silica gel packets (the ones that come with new shoes or handbags). Seal your watch in a bag with a few packets, then use the vacuum sealer to suck out the air.

This creates a vacuum, which should pull the water out of your watch. Just make sure to keep an eye on it, as leaving it too long could damage the watch.

Option 3: The Professional Route

If your watch is fancy or you're just not feeling DIY, it's time to call in the pros. A watchmaker can open up your watch and clean it out properly, making sure no water's left behind.

How to remove water from the inside of a watch - 100% working - YouTube

But be prepared, this can be pricey. And while they're at it, they might suggest a full service, which could set you back even more. But hey, at least you'll know your watch is in good hands.

Prevention is Better Than Cure

Now that we've got the water out, let's make sure it doesn't happen again. Here are a few tips:

• Know Your Watch's Limits: Don't take your watch deeper than its water resistance rating.
• Be Gentle with the Crown: The crown is your watch's weak spot. Keep it pushed in when you're swimming or in the shower.
• Regular Maintenance: Get your watch serviced regularly. It's like a check-up for your watch, helping to keep it in tip-top shape.

And there you have it! You're now a water watch rescue expert. So next time your timepiece takes a dip, you'll know exactly what to do. Happy (dry) watch wearing!