How To Fill A Suorin Drop With Juice

So, there I was, standing in the vape shop, staring at the sleek, little Suorin Drop. It was love at first sight, but then I remembered the dreaded task at hand - filling it with juice. I mean, come on, who hasn't struggled with that tiny, fiddly top? But fear not, fellow vapers, I've navigated the challenges and I'm here to share my wisdom with you.

First Things First: Gather Your Gear

Before you even think about filling your Suorin Drop, you're gonna need a few things. First, your trusty bottle of e-liquid. Make sure it's the right nicotine strength and PG/VG ratio for your device. Then, grab a paper towel or a cloth to catch any spills. Lastly, you might want a small bowl or a shot glass to help with the pouring. Trust me, it's gonna make your life easier.

Prep Your Drop

Alright, now that you've got everything you need, let's prep your Suorin Drop. First, make sure it's turned off. You don't want any accidental vaping while you're trying to fill it. Then, take off the mouthpiece. It should just pull off with a little bit of force. Be careful not to lose it, okay? We don't want to be fishing around for a tiny mouthpiece.

Unscrew the Top

Now, here's where things can get a bit tricky. You need to unscrew the top of the device. It's a tight fit, so you might need to use a bit of force. But be careful, we don't want to break anything. Once you've got it off, you'll see the fill hole. It's tiny, I know. But don't worry, we'll get there.

Fill 'Er Up

Alright, now comes the fun part. Pouring the juice. Here's where that shot glass or bowl comes in handy. Pour a small amount of e-liquid into it. We're talking a few drops here, folks. Then, carefully tilt your Suorin Drop and start pouring the juice into the fill hole.

I know, I know, it's like trying to fill a thimble with a firehose. But take your time, and you'll get there. Remember, it's better to underfill than to overfill. If you get too much juice in there, it can leak out and make a mess. And nobody wants that.

How To Turn On A Suorin , Suorin Drop 2 Pod kit FAQs – JRAU

Prime the Coil

Once you've filled it up, it's time to prime the coil. This just means getting the juice to saturate the coil so you can vape right away. Drip a few drops of e-liquid onto the cotton inside the fill hole. Then, put the mouthpiece back on and let it sit for a few minutes to absorb the juice.

Test It Out

Alright, you're almost there! Now it's time to test your handiwork. Turn on your Suorin Drop and take a few puffs. If it's working, you should see the light on the device change color. If it's not, don't panic. It might just need a little more time to prime. If it's still not working after a few minutes, you might have overfilled it. No worries, just tip it upside down to get some of the juice out and try again.

And there you have it! You've successfully filled your Suorin Drop with juice. Wasn't so bad, was it? Now, go forth and vape, my friends. You've earned it.